Netgear Extender Setup
Netgear Extender Setup
Netgear extender setup is the ultimate way to boost your current WiFi range and speed. Although your typical router has more than enough reach to cover a small home or apartment with WiFi, yet it may unable to cover a larger home. As a result, dead zones will crop up in larger homes where you can’t stream your favorite movie, listen to Spotify, or shop online. In such a scenario, using a WiFi range extender can help you out. Once you are done with the Netgear extender setup, it takes your router’s existing WiFi signals and rebroadcasts them to provide you with WiFi in every nook and cranny of your home. The connection established should be netgear_ext.
Netgear provides a setup wizard to its users in order to make the extender installation easier than ever. This wizard, known as Netgear Genie Setup, offers step-by-step on-screen instructions to install and configure a new WiFi Extender. All you have to do is just walk through these instructions one by one. That’s why it can be said the easiest method for Netgear Extender installation. To get started with the New Extender Setup, you need to connect with Genie Smart Setup Wizard. Let’s have a look at the steps to get the job done.
- Power on your wireless extender.
- Switch on your desktop or laptop properly.
- Load any web browser such as Chrome, Firefox, Explorer, Edge, or Safari.
Once done, the browser will take you automatically to the Netgear genie setup wizard login page. If this is not the case with you, manually type mywifiext.net in the address field and press enter key. Use the default credentials and hit the Login button. Doing so will take you to the Netgear Smart Wizard.
Important Note: Various users get confused between the Netgear Genie and Genie Smart Setup and believe both are same. Let us clarify here that they both are different from one another. Netgear Genie is an app for desktop and mobile to manage and repair the home network whereas the genie setup wizard provides a step-by-step guide for installing a new extender. If your PC is running the Windows 10 OS, you need to download Netgear Genie Windows 10 app.
Netgear Genie Smart Setup Wizard Instructions
Netgear extenders are helpful in extending the current wireless network range and coverage to far corners of a home or office. Therefore, around 99% of users go with WiFi extenders when it comes to access hassle-free internet all over the house or workplace. And the Netgear genie setup wizard is another benefit of using Netgear extenders. It makes the extender setup so easy that even novice users can do it without any issue. Here are the installation on-screen instructions provided by the Genie Smart Setup Wizard:
- Input the name for your extended wireless network and hit continue.
- Open the WiFi network manager on your desktop, laptop or mobile.
- Now, click on the finish button to complete the setup.
- Unplug the extender and keep it to anywhere you like.
- Make sure the extender’s location is dirt-free.
- You can even take the help of router link LED to find the perfect spot for your extender.
Still Unable to Access Netgear Genie Smart Setup?
Don’t panic! We are here to help if you can’t log in to Netgear extender via Genie, the smart wizard shows no internet connection but everything works, the web browser keeps directly taking you to the genie setup page after successfully extender installation, and a lot more. You can visit our Blog page for troubleshooting tips provided by experts. Or just contact us and get instant Netgear Genie setup help for issues you are facing. We can also help you in resolving issues you may face while downloading the Netgear Genie Windows 10 app.
Can I Use the Smart Setup to add a WPS Client to My Extender’s Network?
WPS or WiFi Protected Setup enables you to add a wireless computer or device without the need of typing WiFi password.
- Open an internet browser on your PC
- Click on the web browser’s address field and type www.mywifiext.net.
- A login window will appear.
- In case you don’t see the login prompt, add http:// before the URL.
- Fill in the username and passphrase and click on the login button.
- Once the Netgear genie setup wizard opens, click on add WPS client option.
- There are two setup options namely Push Button and PIN Number. Choose one of them as per your convenience.
Note: You can also use the Netgear Genie Windows 10 app to get the job done.
As soon as the device gets connected, the WPS process automatically sets it up using the network passphrase. Once done, you will get a confirmation message for the same. In case you experience any type of issue with the Netgear Genie Windows 10 app or the Genie smart wizard, get instant help from our escort şişli experts.
